Description Product Overview When you’re commissioning a machine tool, dialling in a lathe bed for twist, or levelling a surface grinder, you need a precision level with a vial sensitive enough to pick up deviations no builder’s spirit level could dream of catching. This Sokkisha 250mm Precision Machinist Level is a heavy, solidly-built Japanese engineer’s level from one of the country’s most storied precision instrument makers — the firm that became Sokkia (now part of Topcon). It’s the sort of shop tool that gets passed down a generation, and at this size it sits in the sweet spot for general machine installation and geometry checks. 250mm lapped steel base — enough bearing length to read machine ways, bed surfaces, and fixture plates reliably without being unwieldy. High-sensitivity main vial for detecting minute deviations invisible to trade-grade levels — the bread and butter of machine tool alignment work. Solid cast body with heft that sits flat and stays put during readings, rather than skating around on a greased way. Ideal for lathe bed levelling, milling machine commissioning, surface plate installation, machinery rebuilds, and millwright/fitter work. Japanese-built by a maker with a century-long reputation for precision metrology and surveying instruments. Condition Used (Good Condition / Functional with Minor Cosmetic Flaws). Full transparency on this one: the plastic cover that shrouds the glass bubble vial has a small superficial crack. It’s cosmetic only — it does not penetrate through to the glass capsule itself, the vial is intact, and the bubble reads and moves freely. No impact on function or accuracy. The base surface shows some light scratches from shop use, but they’re so shallow you can barely catch them with a fingernail — nothing that would compromise seating on a reference surface or affect a reading. The body has been kept well oiled by the previous owner, which is exactly what you want to see on a used Japanese precision tool: no rust bloom, no pitting, just honest patina. Stored in its original fitted wooden case, which has protected it properly over the years. A straightforward, functional shop-floor level at a sensible price compared to a new equivalent. Included: 1 x Sokkisha 250mm Precision Machinist Level Original fitted wooden storage case Brand Information Sokkisha Co. was founded in Tokyo in 1920 and grew to become one of Japan’s most respected names in precision measuring and surveying instruments — credited with developing Japan’s first automatic level. The company rebranded to Sokkia in the early 1990s and was acquired by Topcon in 2008, but vintage Sokkisha-stamped tools from the pre-1990s era are recognised by toolmakers and millwrights as cream-of-the-crop Japanese precision kit. A Sokkisha level is a serious piece of industrial heritage that still earns its keep on the shop floor. Specifications FeatureSpecificationBrandSokkisha Co. (later Sokkia / Topcon)TypePrecision Machinist LevelNominal Length250mmBaseLapped steel, flat reference surfaceVialGlass bubble capsule (intact, fully functional)Country of OriginJapanConditionUsed — Good / FunctionalKnown FlawsSuperficial crack in plastic vial cover (does not affect glass capsule or function); light base scratchesIncludedLevel, original fitted wooden case Keywords Sokkisha precision level, Sokkisha 250mm machinist level, vintage Japanese engineers level, Sokkia machinist level, precision engineers level, machine tool level, lathe bed level, fitter’s level, millwright level, vintage Sokkisha, Japanese precision metrology, surface plate level
